Search This Blog

Use this link to invite advertisers and get 50% of the fees we collect from them: Anonymous Ads Paid ads should appear after you've embedded your ad unit and started generating unique impressions, it may take a few hours. If there a

Auto Green / Standby Problem: Coocaa 32S3M Software Installation

 

If you encountered the defect or symptoms as show above with Coocaa 32S3M, then you need to install a fresh operating system, burn new keys and MAC address to your TV.

Defect symptoms are as follows, when the TV plugin to the power source, it's light indicator turns red then green for a while then going back into red. Please refer to the above video for your reference.

In order for you to install the fresh software of Coocaa 32S3M you will need the following;  

Coocaa 32S3M:

Please refer to the video below for step by step software update guide / instructions:


Step by Step Guide on how to install Coocaa 32S3M  Fresh Software
1. Download the software below link:
https://drive.google.com/file/d/1pdsDcrHXequzrNTQdhxKocLQURCf99Xs/view?usp=sharing

2. Extract the "Coocaa 32S3M Software.zip" . It contains the following;

  1. allupgrade_3563i_sos.bin
  2. hdcp_cvt_3563i
  3. mac_cvt_3563i

2. Move the following extracted software to USB Flash drive root directory.

  •          allupgrade_3563i_sos.bin

3. Insert the USB Flash Drive containing the software into TV USB Port.

4. Cut the power / unplug the TV from power source for at-least 10 seconds.

5. Restore the power / plug the TV from power source. (Please don't do anything.)

6. Wait for at least 5 minutes, if the light indicator blinking it means the installation progresses.

7. After 5 minutes, the light indicator still blinking, Cut the power / unplug the TV from power source for at-least 10 seconds.

8. Remove or take out the USB flash drive.

9. Restore the power / plug the TV from power source. (If the update is successful, it will automatically boot up.)

10. Setup the TV.

11. Move the extracted file to USB Flash Drive. Please refer to below image;

***Note: USB Flash should be fat32 and no other file inside. Only "hdcp_cvt_3563i and mac_cvt_3563i" please refer to above image.

12.3 Cut the power / unplug the TV from power source for at-least 10 seconds.

12.4 Insert the USB flash drive containing folder of hdcp_cvt_3563i and mac_cvt_3563i into your Coocaa 32S3M USB port.

12.5 Restore the power / plug-in the TV back to the power source.

12.6 Turn "On the TV" and do nothing and wait for the pop-up message.

hdcp_cvt_3563i: OK

mac_cvt_3563i: OK


To confirm if it successfully installed please do the following step by step guide;

1. Cut the power / unplug the TV from power source for at-least 10 seconds.

2. Insert the USB flash drive containing Coocaa 32S3M key into your Coocaa TV USB port.

3. Restore the power / plug-in the TV back to the power source.

4. Turn "On the TV" and do nothing and wait for the pop-up message.
Please refer below image;

If you are reading this, congrats you do it right!

No comments:

Post a Comment

 

Popular Posts